60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28" - Kaiezen
Kaiezen

60W CO2 Laser Engraving Cutting Machine, Working Area 20"*28"

Regular price $1,899.99 $0.00 Unit price per
Shipping calculated at checkout.

??

Our products have always been very popular in the market.

The best way to describe how these lasers work is to compare it to your printer. This device uses the images you would typically print on paper, but instead, a CO2 laser beam is fired on the surface which engraves the design on the material.

??

  • Laser: CO2 laser source, 60 watts
  • Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, Corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, Delrin, melamine, paper, pressboard, matte board and more.
  • Cutting Materials: Wood, acrylic, plastic, Corian, Delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork, and more.

We strive to provide the best image quality, speed, reliability, and ease of use. By using only the highest-quality components, our lasers are known for their reliability and performance. We can also help you via e-mail or remote computer access!

??

Features:

  • 60W Laser Tube Pre-installed, Working Size: 20??????????x28??????????
  • Used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics, etc.
  • Higher-resolution standard optics, no additional expensive lens packages needed
  • Visible red dot pointer for guidance
  • Air compressor directs a constant stream of air to remove heat and combustible gases from the work area

??

Engraving Area

28" x 20"(700??x 500??mm)

??

System Environment:????????????

WINDOWS 2000/WINDOWS XP/ WIN7/ WIN8/VISTA/10 (32bit and 64 bit)

DO NOT support iOS system

??

Maximum Engraving Depth

10 mm

??

Laser Wattage

CO2:??60, watts

??

Laser Source

Digitally controlled CO2 laser tubes are fully??modular, permanently aligned, and field replaceable.

??

Air Assist

Attach an air compressor to our included Air Assist to remove excess heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

??

Software includes:

RDworksV8, corelaser

Compatible Software:

CADlaser, CorelDraw, etc. (Do not include in the package)

Red Dot Pointer

Since the laser beam is invisible, a Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.

??

X-Axis Bearings

Ground and polished stainless steel long-lasting bearing system.

??

Resolution

User-controlled??up to 4500??dpi.

??

Speed and Power Control

Vector??color mapping links speed power, and focus to any RGB??color.

??

Print Interface

USB Connection. Compatible with Windows XP/Vista/7/8/10/2000.

??

Size (W x D x H)

47.2" x 34.2" x 36.6"(1200 x 870 x 930mm)

??

Weight

330.7lbs (150kg)

??

Electrical Requirements

Auto-switching power supply accommodates??110volts, 60 Hz, AC.

??

Air Compressor

An Air Compressor can work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

??

Colors:

Yellow & Black

??

??

Materials

??

Engrave

Cut

Wood

x

x

Bamboo

x

x

Acrylic

x

x

Fabric

x

x

Glass

x

??

Coated Metals

x

??

Ceramic

x

??

Delrin

x

x

Cloth

x

x

Leather

x

x

Marble

x

??

Matte Board

x

x

Melamine

x

x

Paper

x

x

Mylar

x

x

Pressboard

x

x

Rubber

x

x

Wood Veneer

x

x

Fiberglass

x

??

Painted Metals

x

??

Anodized Aluminum

x

??

Tile

x

??

Plastic

x

x

Cork

x

x

Corian

x

x

Stainless Steel

*

??

Brass

*

??

Metals with plating can NOT be engraved or cut.

*CO2 lasers will mark bare metals when coated with a metal marking solution. Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound.

??

Package Includes:

1x Laser

1x Water Pump

3 x Water Hose

1x Air Compressor

1x Exhaust Fan

2x Venting Tube

1x Laser Tube

1x Bearings & Belts

1x Manual

1x USB Cable

1x Software CD

1x Power Cord

1x Ground connector

1x Accessory Bag:

1x bag with Allen wrenches

1x network cable

1x Silica gel tube

1x Roll of double-faced tape

??

FQAs:

How tall is this product?

930mm (36.6?????)

??

What?????s the height of the base?

220mm (8.7?????)

??

What software is this engraver compatible with?

Just RDworksV8???corelaser and CADlaser

??

What systems is this engraver compatible with?

It?????s perfectly compatible with Windows 8, 7 10 (64/32 bit), XP, 2000, Vista but NOT compatible with the iOS system)

??

Is there any limitation for the maximal depth of engraving materials?

Around 23cm???flexible platform???

??

What size is the engraving area?

28" x 20" /700 x 500 mm

??

What?????s the maximal engraving depth of this engraver?

It shall be within 0-8mm, but still depends on the speed and materials

??

How much is the laser power?

CO2 glass 60W rated an estimated 2,500 ????? 3,000 hours. 8 hours????? work-time a day is recommended and you?????d better let the engraver rest for half an hour each 4 hours??

??

Is there any limitation on the material thickness?

The maximum engraving material thickness shall be 230mm

??

What engraving materials can this engraver work with?

Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, Corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, Delrin, melamine, paper, pressboard, matte board and more.??

What cutting materials can this engraver work with?

Wood, acrylic, plastic, Corian, Delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork, and more.

??

Is there any rotary attachment in it?

No, but you can install one

??

How long is the laser tube?

1000mm

??

Is there a red dot pointer in the engraver?

Yes
How much is the engraver?????s internal??storage?

256M

Is there an air??compressor in it?

Yes

Is there a water chiller in it?

Yes

Is the laser safe to operate?

Yes, the laser is completely safe to operate. It is secured with interlock devices ???NOT INCLUDED??? so it will not run with the device door open.

??

Can the laser engrave metal?

No. Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound.

??

Can the laser cut through metal?

No. But it will still mark on coated metal, even though our system is not ideally suited for metal applications.

??


Share this Product