1100lbs Automatic Sliding Gate Opener Electric Gate Motors
This powerful electric sliding gate opener is an ideal choice to safeguard your home or company at all times. It uses an RF hopping code to prevent replay attacks, which makes it impossible for eavesdroppers to record the transmission to replay it later to open the gate. This heavy-duty gate opener is incredibly smart, that is fashioned with an infrared optical sensor, and will retract while facing a barrier. The gate opener also has a fast-moving speed. Once it senses someone is close, the gate will open immediately. Therefore, our gate opener can be used with a battery, a solar panel or on a charge.
- Our sliding gate opener uses a DC motor. It has a voltage of 24V and a power supply of 150W. The high capacity and big torque allow up to 1100lb bearing. Our DC motor is easier to install than an AC motor. The DC motor has a 12V/9Ah storage battery and can be charged using electricity or solar energy.
- There is no need to install a magnetic fiber switch since the gate opener can adjust speed as well as distance itself and will go back facing a barrier.
- There is only one button on the RF code remote control. Press the button to open, close, and stop the gate. One gate opener can be controlled by up to 25 remotes.
- This sturdy gate opener uses high-quality American Standard 41 Chain and will last a lifetime.
- Our gate opener is also compatible with solar panels. If you choose to set up solar panels, you will have to purchase the solar charging kit separately.
- This sliding gate opener is equipped with an infrared optical sensor. The gate will automatically open when someone is close by.
|Power Supply:||220V/50Hz; 110V/60Hz|
|Maximum Gate Weight:||500KG/1100LB|
|Motor Power:||DC24V 150W|
|Limit Switch:||Electronic limit switch|
|Gate Moving Speed:||16-18m/min(52-59ft/min)|
|Remote Control Frequency:||433.92MHz|
|Remote Control Range:||≥30M(98.4ft)|
|Remote Control Mode||Single Button Mode/Three Button Mode|
|Recording of Up Remotes:||100pcs|
|Work Duty:||S2, 20min|
|Working temperature||-20°C ~ +70°C(-4°F-158°F)|
|1x Sliding gate opener DC motor||1x Horizontal mounting plate|
|2x Remote controls||4x Foundation bolts M8|
|2x Manual release keys||1x Magnet & block|
|2x 6M chains||2x M6*10 screws|
|1x Infrared sensor(1set)||1x Sprocket cover|
|2x Tie rods||4x M8*60 screws|
|4x Square screws||8x Nuts M6&M8|